NEC Univerge SV9100 - Figure 3-66 Anchor Bolt from Wall (9.5 Chassis); Figure 3-67 Remove Support Bracket (Base and Expansion Chassis)

Issue 3.0
SV9100 System Hardware Manual 3-55
4. Remove the M4 x 8 screws from the wall mount bracket.
Use the screw holes marked with the number 2 on the upper
and lower brackets.
Figure 3-66 Anchor Bolt from Wall (9.5” Chassis)
Figure 3-67 Remove Support Bracket (Base and Expansion Chassis)