NEC Univerge SV9100 - Figure 5-53 Mount Multiline Terminal Wall on Wall Plate; Figure 5-54 Removing the Multiline Terminal

Issue 3.0
5-58 Installing DT Series Digital and IP Multiline Terminals
5. Push spare line cord behind the multiline terminal.
4.7.1.3 Removing the Multiline Terminal from the Wall Mounted
Base Plate.
To remove the multiline terminal, push up on the terminal until it
comes loose.
Figure 5-53 Mount Multiline Terminal Wall on Wall Plate
Figure 5-54 Removing the Multiline Terminal