NEC Univerge SV9100 - Figure 3-92 Attach Rubber Feet to CHS2 UG-US Chassis

Issue 3.0
SV9100 System Hardware Manual 3-75
6.1.2 Multiple CHS2UG-US Chassis Installation
Expansion chassis (maximum of three) can be added to the CHS2UG
STAND KIT (K) and require an additional CHS2UG STAND KIT (EXT) per
chassis.
1. Install the five rubber feet to the bottom of each chassis.
2. Each additional chassis requires a CHS2UG STAND KIT (EXT) to be
installed (refer to Figure 3-93 Install Additional CHS2UG STAND KIT
(EXT) on page 3-76).
Figure 3-92 Attach Rubber Feet to CHS2UG-US Chassis