NEC Univerge SV9100 - Figure 3-62 Install the Shaft (9.5 Chassis); Figure 3-63 Install the Stopper (9.5 Chassis)

Issue 3.0
3-52 Installing the SV9100 Chassis
12. Attach the shaft from the mounted wall bracket to the lower bracket
and secure using the supplied retaining washer.
13. Using the 2 M3 x 6 spring washer screws supplied, install the stopper
between the chassis and the wall mounted bracket.
Figure 3-62 Install the Shaft (9.5” Chassis)
Figure 3-63 Install the Stopper (9.5” Chassis)