NEC Univerge SV9100 - Figure 4-11 IPLE LED Interface; Figure 4-12 Voip Connections; Figure 4-13 Connecting an IPLE Daughter Board to a Network;Pc

Issue 3.0
4-30 Installing the SV9100 Blades
Refer to Figure 4-11 IPLE LED Interface for a functional display of the LED
interface when installed on a GCD-CP10.
3.2.5 Connectors
Figure 4-12 VoIP Connections on page 4-31 shows a typical connection
layout. Figure 4-13 Connecting an IPLE Daughter Board to a Network/PC
on page 4-32 illustrates how to connect a VoIP Daughter Board to a
Network or PC.
Figure 4-11 IPLE LED Interface