Issue 3.0
SV9100 System Hardware Manual 2-9
The maximum slot and channel capacities are listed in Table 2-3 SV9100 9.5”
(Base and Expansion) Maximum System Capacities – Trunks/Ports/Channels.
Table 2-3 SV9100 9.5” (Base and Expansion) Maximum System Capacities – Trunks/Ports/Channels
Number of:
9.5”
Base
9.5” Base + Expansion
System
Maximum
x 1
(CPU + 2
Slots)
x 1
(6 Slots)
x 2
(12 Slots)
x 3
(18 Slots)
X4
(24 Slots)
Number of Timeslots
1
PCM
48 104 208 312 416 416
Data
7 7 14 21 28 28
DT400/DT300 TDM (-48V)
32 80 176 272 368
Tot al 89 6
SLT (-28V)
32 80 176 272 368
SLT (-48V)
820446892
DT800/DT700 IP
896
Desktop Applications
(Desktop Client, Desktop Client with
Shared Services and SoftPhones)
256
Tot al 25 6
SIP/WLAN
896
Tot al 89 6
Analog Trunks (COT)
16 40 88 136 184
Tot al 40 0
BRI
16 40 88 136 184
PRI (1.5M)
48 96 192 192 192
IP Trunk (SIP)
400
DTMF Receivers
32 32 32 32 96 *2
VoIP Channels
256 256
Voice Mail Channels on CPU
16 channels 16
Modem
1 channel 1
1 = For-law countries 104 timeslots per chassis are assigned the G.711 PCM communications (e.g., voice
communications) and 7 timeslots per chassis are assigned for the Data communications (e.g., HDLC over ISDN). Thus
the simultaneous data communications are limited up to seven per chassis.
2 = An additional 64 DTMF Receivers are available when the GPZ-BS10 is installed.
If using Caller ID to analog trunks and DSP resources are set to common, DSP resources will only be used for analog
trunks and not analog stations.
To Next Page
Loading...
