Issue 3.0
3-96 Installing the SV9100 Chassis
7. Remove two screws and remove the Battery Tray Bracket.
8. Refer to Figure 3-123 Battery Cable Connection Guide for connection
of battery cable to battery terminals. Repeat for additional battery
connection.
9. Install batteries into Battery Tray. Refer to Figure 3-124 Installing
Battery Connection Cable.
Figure 3-122 Removing Battery Tray Bracket
Incorrect Installation Of Batteries May Damage The
Fuse Unit Or Cause Possible Fire.
Figure 3-123 Battery Cable Connection Guide
To Next Page
Loading...
