NEC Univerge SV9100 - Figure 4-7 GCD-CP10 Blade with Daughter Boards Installed

Issue 3.0
4-16 Installing the SV9100 Blades
3.1.1 Description
The GCD-CP10 controls all the functions and operations of the SV9100
system using the system software loaded into the GCD-CP10 memory. The
system software can be upgraded as new software becomes available.
One GCD-CP10 blade must be installed in the Controlling Chassis.
The GCD-CP10 functions are:
 Music on Hold tone Circuit, External Source Control Circuit
 Voice Mail/VRS Interface Circuit
 VM recording time
 SD-A1 US memory card: 15 hours
 SD-B1 US memory card: 120 hours
 Number of mail boxes: 896
 System Program and System Data Storing Memory Circuit
 SD Card/USB Interface Circuit
 Ethernet Interface Circuit
Figure 4-7 GCD-CP10 Blade with Daughter Boards Installed