NEC Univerge SV9100 - Figure 3-90 Secure CHS2 UG-US Chassis to CHS2 UG STAND KIT (K) with Screws; Figure 3-91 Secure Stand Mount to Floor with Screws

Issue 3.0
SV9100 System Hardware Manual 3-73
3. Using supplied screws, secure the CHS2UG STAND KIT (K) to the
floor (refer to Figure 3-91 Secure Stand Mount to Floor with Screws
on page 3-74)
.
Figure 3-90 Secure CHS2UG-US Chassis to CHS2UG STAND KIT (K) with Screws
WARNING
To prevent possible damage to the 19” chassis due to
falling, NEC recommends screws be installed in the
stand mount brackets as soon as possible.
Expansion
Plate