Issue 3.0
SV9100 System Hardware Manual 5-49
4.2 Applying Power to the DT700/DT800 Multiline Terminal
The DT700/DT800 series terminals support two different power sources:
AC-2R/AC-3R
Plug the optional AC-2R/AC-3R AC Adapter input Jack in the terminal base unit,
and plug the 2-prong wall plug of the AC Adapter in a standard 120 Vac wall
outlet.
In-Line Power/PoE (Power over Ethernet)
In-Line Power (sometimes called Power Over Ethernet) is a LAN technology
that allows standard 10 Base-T/100 Base-TX data cables to pass electrical
current from a power source to a requesting end device.
ITL Terminals
An AC-L Unit is required if using local power.
Figure 5-39 Line Cord Groove Back of Terminal (DT400)
To Next Page
Loading...
