Issue 3.0
SV9100 System Hardware Manual 4-55
The blade provides:
Eight Digital Station ports
Two analog extension ports support Caller ID Circuit, Message
Waiting Lamp Control (Controlling Voltage:-110Vdc) for all ports
Two status LEDs
Refer to the following tables for maximum upgrade capacities of the
GCD-LTA
blade:
Table 2-6 SV9100 Maximum 9.5” Gateway and 19” System Capacities
– Blades on page 2-12
Table 2-7 SV9100 Maximum 9.5” Base and Expansion System
Capacities – Blades on page 2-14
4.7.2 Installation
Install the GCD-LTA blade in any available universal slot.
❍ When connecting a fax machine or analog modem, make
sure to set Program 15-03-03 to 1 (special terminal) to avoid
communication problems.
❍ The GCD-LTA is categorized as TNV2. With this
designation, off-premise wiring is not acceptable.
❍ Branch connection is not acceptable.
To Next Page
Loading...
