Issue 3.0
9-28 Installing SV9100 Optional Equipment
Quick-start installation manual
To install the VSR:
1. Unplug the line cord from your telephone and connect it to either port on the
D
term
VSR unit.
2. Connect the NEC telephone system to the remaining port on the D
term
VSR
unit. You are now ready to record.
For Windows 2000 or XP
1. Using the USB cable provided, connect the USB interface on the D
term
VSR
unit to your PC. Windows automatically detects the new hardware and starts
the New Hardware Wizard. This displays a dialog box similar to the one
shown below. Select the second option, Install from a list or specific
location, and press Next>.
IMPORTANT
The use of monitoring, recording, or listening devices to eavesdrop,
monitor, retrieve, or record telephone conversation or other sound
activities, whether or not contemporaneous with transmission, may be
illegal in certain circumstances under federal or state laws. Legal advice
should be sought prior to implementing any practice that monitors or
records any telephone conversation. Some federal and state laws require
some form of notification to all parties to a telephone conversation, such
as using a beep tone or other notification methods or requiring the consent
of all parties to the telephone conversation, prior to monitoring or
recording the telephone conversation. Some of these laws incorporate
strict penalties.
To Next Page
Loading...
