Issue 3.0
SV9100 System Hardware Manual 1-7
GCD-4COTB COT 4-port Loop/ground Start Trunks
GPZ-4COTF COTDB 4-port Loop/ground Start Trunks on GCD-4COTB, GCD-LTA
GCD-4LCA LC 4-port Single Line Telephone Interface
GPZ-4LCA LCDB 4-port Single Line Telephone Interface on GCD-4LCA and
GCD-8LCA
GCD-8LCA LC 8-port Single Line Telephone Interface
GPZ-8LCE LCDB 8-port Single Line Telephone Interface on GCD-4LCA and
GCD-8LCA
GCD-2BRIA BRT 2 Basic Rate Interface
GPZ-2BRIA BRTDB 2 Basic Rate Interface on GCD-2BRIA, for SV9100 can also
be mounted on the GCD-LTA blade
GCD-PRTA PRT 1 Primary Rate Interface
GCD-CCTA CCT Common Channel Interoffice Signaling Trunk Interface/
Common Channel Handler
GCD-4DIOPA DIOP 4 DID/OPX
GCD-4ODTA ODT 4-port Tie Line Interface (E&M)
GCD-LTA LTA 8 Digital Station/2SLT for GCD-CP10 only
GPZ-IPLE VoIPDB VOIP on the CPU
GCD-VM00 VM00 Voice Mail and Server
GCD-ETIA GSWU PoE Gigabit Switch Unit
GCD-PVAA PMS Packet Voice Application
GCD-SVR2 SVR2 Server blade
GCD-CP10 CPU Main Processor Blade for KTS
SD-A1 US 1G-APP-CF 1GB InMail SD Card
SD-B1 US 4G-APP-CF 4GB InMail SD Card
GCD-RGA RGA Application Gateway – Router and Conference
GCD-4LCF LC 4-port Single Line Telephone Interface
GCD-8LCF LC 8-port Single Line Telephone Interface
GPZ-4LCF LCDB 4-port Single Line Telephone Interface on GCD-4LCF and
GCD-8LCF
GPZ-8LCF LCDB 8-port Single Line Telephone Interface on GCD-4LCF and
GCD-8LCF
AKS-RGA-APP-
GATEWAY-CF
AKS-RGA CF Application Gateway – Compact Flash
Table 1-4 Blade Equipment List (Continued)
Equipment Name Abbreviations Equipment Description
To Next Page
Loading...
