NEC Univerge SV9100 - Page 99

Issue 3.0
SV9100 System Hardware Manual 2-13
GCD-8LCF
(8 Single Line Telephone Interface)
25 623112
GPZ-4LCF
(4 Single Line Telephone Interface
Daughter Board)
25 62374
GPZ-8LCF
(8 Single Line Telephone Interface
Daughter Board)
25 62356
GCD-LTA

(8 Digital/2 Single Line)
2 2 2 8 23 An optional
GPZ-4COTF or
GPZ-2BRIA can be
installed
Trunk Blades:
GCD-2BRIA
(2 Basic Rate Interface)
25 623
T interface = 100
S interface = 224
–
GPZ-2BRIA
(2 Basic Rate Interface Daughter
Board)
25 623
T point = 50
S point = 112
–
GCD-4COTB
(4 Loop/Ground Start Trunk)
25 623100 –
GPZ-4COTF
(4 Loop/Ground Start Trunk
Daughter Board)
25 62350 –
GCD-4DIOPA
(4 DID/OPX)
25 623
DID = 100
OPX = 224
When installed as a
DID blade
GCD-4ODTA
(4 E&M)
25 623100 –
GCD-PRTA
(1 Primary Rate Interface)
24 416
T point = 16
S point = 37
Blade is used for
Primary Rate
Interface or T-1
Interface
Optional Blades:
GCD-PVAA
(Interactive Voice Response,
PVA PMS)
11 11 1
Table 2-6 SV9100 Maximum 9.5” Gateway and 19” System Capacities – Blades (Continued)
Hardware
9.5”
Chassis
19”
Chassis
with CPU
19”
Chassis
without
CPU
19”
Chassis
x4
Networked
Chassis
(NetLink)
Comments
Number of Slot(s) for Interface
Package
3 Slots 5 Slots 6 Slots 23 Slots