Migrating from an S8700 or S8710 Media Server to an S8720 Media Server
1012 Upgrading, Migrating, and Converting Media Servers and Gateways
4. On the Select Release Version window, ensure that the Build line and <OK> are
highlighted. Press Enter to partition the hard disk and reformat the partitions.
Once the drive is properly configured, the program starts the installation process and
reports the progress.
These processes can take up to 20 minutes. When the media server is ready to reboot, the
CD-ROM drive drawer opens. You must remove the CD from the drive at this time.
The reboot can take up to 3 minutes. The telnet session drops automatically.
Accessing the second S8720 Media Server
To access the second S8720 Media Server:
1. Clear the ARP cache on the laptop if necessary. For more information, see Clearing the
ARP cache on the laptop computer on page 967 and return here.
2. Open a browser and connect to the media server.
3. Log in. For more information, see Accessing the media server maintenance web
interface on page 953.
4. Suppress all alarms.
To Next Page
Loading...
