Migrating from an S8700 Media Server to an S8710 Media Server
922 Upgrading, Migrating, and Converting Media Servers and Gateways
9. Click Submit to view the status of the restore process.
The system displays the Linux Migration - Backup / Restore Status window.
This window might display a BACKUP COMPLETE message with possible series 200 error
messages. Ignore these error messages and continue with restoring the Linux migration
upgrade set.
Installing software update
Note:
Note: Do not perform this procedure if you do not have a Communication Manager
software update file to install.
To use a Telnet session to install the software update file.
1. Use the PuTTY application to reaccess the server using the secure shell (SSH) protocol.
2. Log in as craft.
3. Type cd /var/home/ftp/pub. Press Enter to access the pub directory.
4. At the prompt, type ls -ltr. Press Enter to list files in the pub directory.
The media server displays a list of files in the FTP directory. Verify that the directory
contains the Communication Manager .tar.gz file you uploaded, if any.
5. Type update_unpack update.tar.gz, where update is the release or the issue
number of the latest software update file. An example can be 00.0.411.7-xxxx.tar.gz. Press
Enter.
6. Type update_show. Press Enter to list Communication Manager files to verify that the new
software update file was unpacked.
7. Type update_activate update, where update is the release number or the issue
number of the latest software update file, such as 00.0.411.7-xxxx. For example, do not use
the .tar.gz extension at the end of the file name. Press Enter.
The media server might reboot (reset system 4). If the media server reboots, the server also
might display the message /opt/ecs/sbin/drestart 2 4 command failed.
Ignore this message. You must wait until the restart/reset completes before you enter
additional commands.
The media server displays a message that the software update (patch) was applied.
8. Type update_show again. Press Enter to list Communication Manager files. Review the
list to verify that the new software update file was activated.
To Next Page
Loading...
