Avaya S8100 Series - Connecting the G700 Media Gateway directly

Connecting the G700 Media Gateway directly
Issue 2.1 June 2006 1241
Figure 114: A services laptop computer that is connected directly to the S8710 Media
Server or S8720 Media Server (S8710 Media Server shown)
Connecting the G700 Media Gateway directly
To access the G700 Media Gateway directly, you plug a laptop computer into the Console port
on the media gateway. Plug one end of the CAT5 cable into the services port on the front of the
media gateway. Plug the other end into the NIC on your computer. For more information about
connectivity for your media server, see Figure 111
.
Figure notes:
1. Services laptop
2. Network Interface Card (NIC)
3. NIC adapter cable (if necessary)
4. Black CAT5 crossconnect cable
2
3
iLO
VDCI
1
2
3
133 MGz
100 MGz
100 MGz
UID
2 1
DAL1 DUP MEMORY
RECEIVE MODE
LINC SYNC
TRANS MODE
LINC ACTIVE
cadlsrv2 KLC 042804
1
2
3
4
2 1