Migrating an S8500 Media Server to an S8710 Media Server
884 Upgrading, Migrating, and Converting Media Servers and Gateways
To access the Installation Wizard:
1. Open the browser with the Home page.
2. Click Launch Avaya Installation Wizard.
3. Follow the prompts to configure this server as "active." For more information, click Help on
any page.
Configure this server as "active."
On the S8710 Media Servers
Connecting customer LAN cables
To connect the LAN cables for the customer:
1. Connect the CAT5 cables from both S8710 Media Servers (Ethernet 4) to the customer
LAN.
Restoring the translations
To restore the translations to the active media server:
1. Connect the compact flash reader cord to either USB port on the back of the media server.
2. Insert the compact flash card with the translations into the bottom slot of the drive.
This card is the card that you use in Backing up the translation files
on page 878.
3. Under Data Backup/Restore, click View/Restore Data.
4. Select Local PC Card.
Note:
Note: If the laptop is connected to the standby media server, SSH across the
duplication link to the active media server. The SSH address for server 1 is
192.11.13.13. The SSH address for server 2 is 192.11.13.14. Ensure that you
copy the translations to the active media server.
5. Click View.
Note:
Note: For the next step, the correction translation file is the most recent file.
6. Select the correct translation file and both Force options.
To Next Page
Loading...
