Avaya S8100 Series - Connecting to the standby media server; Connecting to the active media server; Installing the translations

Migrating a DEFINITY ONE/S8100 to an S8700-Series Media Server with IP-PNC
816 Upgrading, Migrating, and Converting Media Servers and Gateways
4. Select Force restore if server name mismatch and Force restore if backup version
mismatch.
5. Click Restore to restore the translation files.
6. Click Restore Status.
7. Select the first file, scroll down and click Review Status to see the results of the restore.
When done, the screen shows the message Restore is finished.
If the restore process fails, the system displays an error message that states the reason for the
failure and the translation file is not restored. Resolve the reason for the failure and restart the
process.
Connecting to the standby media server
To connect to the standby media server:
1. Start a Web browser.
2. Log in as craft or dadmin.
3. Click Launch Maintenance Web Pages.
4. Under Server, click Release Server.
5. Click Release.
Connecting to the active media server
To connect to the active media server:
1. Start a Web browser.
2. Log in as craft or dadmin.
3. Click Launch Maintenance Web Interface.
4. Under Server, click Status Summary to verify that the standby media server was refreshed.
Do not continue until the standby media server is refreshed.
5. Start a SAT session with Native Configuration Manager or Avaya Site Administration.
6. Login as craft or dadmin.
Installing the translations
To install the translations:
1. Type reset system 4. Press Enter.
2. Return the STS-supplied PCMCIA flash card to Avaya.
To add the IPSI translations before you save translations, continue with Backing up
translations on page 637.