On the S8500 Media Server
Issue 2.1 June 2006 877
Connecting to the media server
To connect to the media server:
1. Use a cross-connect CAT5 cable to connect the laptop to the Services port (2) on the back
of the media server.
Starting a SAT session
To start a SAT session:
1. Start a terminal emulation application, such as Native Configuration Manager or Microsoft
HyperTerminal or use a telnet session.
2. Type telnet 192.11.13.6 5023. Press Enter.
3. Log on as craft or dadmin.
4. Suppress alarm origination.
Checking for translation corruption
To check for translation corruption:
1. Type newterm. Press Enter.
2. If you see the following message:
Warning: Translation corruption detected . . .
then follow the normal escalation procedure for translation corruption before continuing the
upgrade.
Saving translations
To save translations:
1. Perform one of the following actions:
● If the system includes LSPs, type save translation lsp. Press Enter.
● If the system does not include LSPs, type save translation. Press Enter.
To Next Page
Loading...
Need help?
General
