Upgrade tasks for the new standby media server (second server)
Issue 2.1 June 2006 235
Inserting the Communication Manager CD-ROM into the media
server
Insert the CD-ROM that contains Communication Manager into the CD-ROM drive on the media
server. Close the tray.
Note:
Note: You can copy Communication Manager software from an http or tftp server onto
the media server. In this case, skip this step.
Copying Communication Manager to the media server
To copy Communication Manager to the media server:
1. On the browser toolbar, click Refresh to reload the current page.
2. Under Server Upgrades, select Manage Software.
!
Important:
Important: If three releases already reside on the hard disk, you must delete one release to
make room for the new release.