Avaya S8100 Series - Verifying the operation of the media servers; Postupgrade tasks; Enabling scheduled maintenance with SAT; Releasing MMI circuit packs with SAT (duplicated control network only)

Postupgrade tasks
Issue 2.1 June 2006 193
Verifying the operation of the media servers
To verify the operation of the media servers:
1. Click View Summary Status and verify that the following fields show the values as
indicated:
● Duplicated? yes
● Standby Busied? no
● Standby Refreshed? yes
● Standby Shadowing: on
● Duplication Link: up
Postupgrade tasks
Note:
Note: Tasks Enabling scheduled maintenance with SAT on page 193 through on
page 194 use SAT commands on the active media server.
Enabling scheduled maintenance with SAT
To enable scheduled maintenance.
1. Type change system-parameters maintenance and press Enter.
2. Ensure that the administration for the Start Time and Stop Time fields is the same as
before the upgrade.
Releasing MMI circuit packs with SAT (duplicated control network
only)
Type release board UUCSS and press Enter to release the circuit packs that you busied out
in the on page 153 section.