Migrating a DEFINITY Server R to an S8700-Series Media Server
766 Upgrading, Migrating, and Converting Media Servers and Gateways
Transferring translations
Note:
Note: If you sent the translations to the STS group on a tape, STS returns the
translations by e-mail with instructions.
For how to transfer translations if the existing system has an optional drive, see From a
magneto optical disk on page 743.
Once you copy the translations to the hard disk, you must administer the TN2312BP IP Server
Interface circuit packs.
Disconnecting from the active media server
To disconnect from the active media server:
● Unplug the laptop from the Services port (2) on the back of the active media server.
Connecting to the standby media server
To connect to the standby media server:
1. Connect to the Services port (2) on the back of the standby media server.
2. Start a Web browser.
3. Log in as craft or dadmin.
4. Click Launch Maintenance Web Pages.
5. Under Server, click Busy-out Server.
6. Click Busy Out.
Disconnecting from the standby media server
To disconnect from the standby media server:
● Unplug the laptop from the Services port (2) on the back of the standby media server.
To Next Page
Loading...
