Avaya S8100 Series - Recording the Product ID; On the standby S8700 Media Server; Accessing the standby S8700 Media Server

On the standby S8700 Media Server
Issue 2.1 June 2006 909
12. On the services laptop, type ftp 192.11.13.6. Press Enter to start an FTP session from
the laptop to the S8700 Media Server.
13. For the login, type anonymous. Press Enter.
14. For the password, type your e-mail ID. Press Enter.
15. Type cd pub. Press Enter.
16. Type bin. Press Enter to make the transfer in a binary format.
17. Type get name, where name is the name of the Linux migration upgrade set. Press Enter.
18. Log off the system.
Recording the Product ID
To record the Product ID:
1. Click Start > Run to open the Run dialog box.
2. Type telnet 192.11.13.6. Press Enter.
3. Log in as craft or dadmin.
4. At the prompt, type productid. Press Enter.
Record the Product ID for future use.
On the standby S8700 Media Server
Accessing the standby S8700 Media Server
To access the standby S8700 Media Server:
1. Clear the ARP cache on the laptop, if necessary. For more information, see Clearing the
ARP cache on the laptop computer on page 902 and return here.
2. Disconnect the laptop from the active media server.
3. Connect the laptop to the Services port (2) on the standby media server.
4. Log in. For more information, see Accessing the media server maintenance web
interface on page 904 and return here.