Converting some or all ATM port networks to IP-PNC
1120 Upgrading, Migrating, and Converting Media Servers and Gateways
Backing up recovery system files
To back up the system configuration files:
1. Under Data Backup/Restore, click Backup Now.
2. Select the data sets, including Avaya Call Processing (ACP) translations and Save ACP
translations prior to backup. Do not select Full Backup because this option does not
save translations.
Note:
Note: If you back up to a flashcard, Avaya recommends that you use a different
flashcard from the one with the prior release translations. You might need these
translations if you need to back out of the upgrade, migration, or conversion
procedure.
3. Select the backup method.
4. Click Start Backup to start the back up process.
Suppressing alarming
!
CAUTION:
CAUTION: Ensure that you suppress alarming during the upgrade. If you do not, the system
can generate alarms, resulting in unnecessary trouble tickets.
To suppress alarming:
1. Access the command line interface of the server with telnet and an IP address of
192.11.13.6.
2. Log in as craft.
3. Type almsuppress -t time, where time is the length of time that the alarms are
suppressed up to 120 minutes (2 hours). Press Enter to suppress both dial-out and SNMP
alarms.
The system displays the following message:
Alarm is suppressed. 120 minutes left.
4. Log off and close the dialog box.
To Next Page
Loading...
Need help?
General
