On the S8710 Media Servers
Issue 2.1 June 2006 885
7. Click Restore.
8. Click Restore History and select the desired file that you want to restore.
9. Click Status to view the Restore status.
When the restoration is complete, the system displays the following message:
Backup: 0: Restore of <filepath/filename> is completed successfully.
Pretesting the system
To pretest the system:
Note:
Note: Do not connect to the control network yet.
1. Install the license file and the authorization file.
2. Type reset system 4. Press Enter.
3. Type list station. Press Enter.
Verify that the stations on this server are the same as the stations that were on the S8500
Media Server.
4. Type save translation. Press Enter.
5. Perform the necessary administration. For example, use the add duplication
administration command.
6. When you finish, type save translation. Press Enter.
7. If the browser is not running, open the browser with the Home page.
Note:
Note: Before you perform the next step, wait until the Status Summary informs you that
the standby server memory is refreshed.
8. Select Server > Status Summary.
The system displays the Status Summary window.
9. Verify the following settings:
● The Duplicated field is set to yes
● The Standby Busied field is set to no
● The Standby Refreshed field is set to yes
● The Standby Shadowing field is set to on
● The Duplication Link field is up
To Next Page
Loading...
