Migration chapters
Issue 2.1 June 2006 315
Media Server MC (platform 6) before the upgrade, the type must be 8700 Media Server
MC (platform 6) after the upgrade.
● Effective with CM 3.0, Internet Protocol (IP) PNC (FEAT_IP_PNC in the RFA license file) is
always to set to OFF. After you install, migrate to, or upgrade the server, then this attribute
should appear as n (no) in the display-only Internet Protocol (IP) PNC field on page 4 of
the Communication Manager Customer Options screen.
Note:
Note: The Internet Protocol (IP) PNC (FEAT_IP_PNC license attribute, before release
3.0, restricted port network connectivity (PNC) for each of the platforms. The OFF
setting previously restricted MC (platform 6) platforms from using IP-PNC. The
ON setting previously restricted IP (platform 8) platforms from using MC-PNC
configurations. With release 3.0, both of these restrictions were lifted.
Migration chapters
● Migrating to an Avaya S8400 Media Server on page 317
● Migrating to an Avaya S8500 Media Server on page 443
● Migrating to an Avaya S8700-Series Media Server on page 611
To Next Page
Loading...
