On the active S8710 Media Server
Issue 2.1 June 2006 931
Disconnecting from the media server
Disconnect the laptop from the media server.
On the active S8710 Media Server
Note:
Note: This section applies to media server 1.
Accessing the active media server
To access the active media server:
1. Clear the ARP cache on the laptop if necessary. For more information, see Clearing the
ARP cache on the laptop computer on page 902 and return here.
2. Connect to the active media server.
3. Log in. For more information, see Accessing the media server maintenance web
interface on page 904.
Resolving alarms
To resolve alarms:
1. Under Alarms and Notification, click Current Alarms.
2. Select the server alarms that you want to clear and click Clear.
3. To resolve new alarms since the migration, use SAT commands and the following
documentation:
● Maintenance Commands for Avaya Communication Manager 3.1, Media Gateways and
Servers (03-300431)
● Maintenance Alarms for Avaya Communication Manager 3.1, Media Gateways and
Servers (03-300430)
To Next Page
Loading...
