Migrating from a DEFINITY Server CSI in a CMC with an ATA Flash to an S8400 Media Server
360 Upgrading, Migrating, and Converting Media Servers and Gateways
Premigration setup
The premigration team must complete the following tasks. If these tasks are not completed, do
not continue with the migration.
For more information, see Migration paths
on page 356.
To migrate from a DEFINITY system, you must complete the following additional tasks before
you start the migration:
9
Task Description
Ensure that the technical
support representative has
access to the ASG Site
Manager tool.
If an engineer who works on the Avaya WAN, is
supporting the technical support representative during
the upgrade, ensure that the engineer has access to
the ASG Mobile tool prior to the upgrade.
ASG access (remote or on site) is affected when you
upgrade an S8xxx media server from 1.x.x to 2.x.x and
request a new authentication file.
The STARS team provides
the escalation path to report
ASG troubles during the
upgrade.
This event happens at least one day prior to the
migration.
Verify that you have the
appropriate logins and
passwords to access the
media servers and server
complex components.
When you finish installing the authentication file,
Communication Manager has a password for all Avaya
logins, including craft. This password is unique to the
media server of the customer. You can use the
password the next time you log in as craft, if you
access the media server through the Services port.
You do not need an ASG challenge/response to log in
this way, even though every other means of craft
access requires an ASG challenge and response.
This unique craft password remains valid until the
password is changed by installing a new
authentication file.
To Next Page
Loading...
Need help?
General
