On the standby S8700 or S8710 Media Server
Issue 2.1 June 2006 971
Backing up the configuration data and translations to an ftp server on the
network
This procedure assumes that you are backing up from Communication Manager Release 3.0
and later.
To back up the configuration data and translations to the network:
1. Under Data Backup/Restore, click Backup Now.
The system displays the Backup Now window.
2. Under Data Sets, click Full Backup (release dependent).
3. Under Backup Method, select a ftp or select from the options provided.
4. Fill in the following fields for where you are backing up the files:
● User Name
● Password
● Host Name - enter the host IP address
● Directory
5. Click Start Backup.
6. Click Status to view the backup history.
7. Check the box next to the file being backed up and click Check Status. When the backup is
complete, the system displays the following message.
Backup successful
!
CAUTION:
CAUTION: Check the text to verify that there are no error messages. Ignoring the error
message can result in no backup.
Backing up the configuration data and translations to the Services laptop
This procedure assumes that you are backing up from Communication Manager Release 3.0
and later. The backup destination is the IP address of the server being backed up. The backup
is followed by a transfer of the backup file to the laptop. This backup is a manual process.
To back up the configuration data and translations to the Services laptop:
1. On the services laptop, access the media server. For more information, see Accessing the
media server maintenance web interface on page 953 and return here.
2. Under Data Backup/Restore, click Backup Now.
The system displays the Backup Now window.
3. In the Backup Method section, select FTP.
To Next Page
Loading...
Need help?
General
