Migrating from an S8700 Media Server to an S8710 Media Server
910 Upgrading, Migrating, and Converting Media Servers and Gateways
5. Repeat one of the following procedures:
● Backing up the Linux migration upgrade set to the network on page 907 and return here,
or
● Backing up the Linux migration upgrade set to the services laptop on page 908 and
return here
6. Continue with Shutting down the S8700 Media Server
on page 910.
Shutting down the S8700 Media Server
!
CAUTION:
CAUTION: Ensure that you are connected to the standby S8700 Media Server. If you are on
the active S8700 Media Server, you will cause an interchange.
To shut down the standby S8700 Media Server:
1. Under Server, click Shutdown Server.
2. In the Shutdown This Server window:
● Select Immediate Shutdown
● Clear Restart Server after Shutdown
● Select Shut down even if this is the active server
3. Click Shutdown.
4. Disconnect the laptop from the Services port.
5. Disconnect the power cord from the UPS.
On the first S8710 Media Server
Note:
Note: The first S8710 Media Server becomes media server 1.
Turning on the media server
To turn on the media server:
Note:
Note: You must place the CD-ROM in the drive before you turn on the media server.
To Next Page
Loading...
Need help?
General
