Migrating translations
Issue 2.1 June 2006 431
5. When the prompt displays with menu options, select Install or Upgrade Software.
Use the arrow keys to navigate and the space bar to select.
When the system finishes, the media server reboots.
6. Open a Web browser.
7. In the Address field, type http://192.11.13.6. Press Enter to access the login Web
page.
8. Log in as craft or dadmin.
Configuring the media server
To configure the media server:
1. From the Services laptop, open a Web browser.
2. In the Address field, type http://192.11.13.6. Press Enter to access the login Web
page.
3. Log in as craft or dadmin.
4. Under Server, click Server Date/Time.
5. On the Server Date/Time window, set the date, time, and time zone for the server.
6. Click Submit to put the changes into effect.
7. Under Maintenance, click Launch Maintenance Web Interface > Configure Server.
8. In the Review Notices window, click Continue.
9. In the Back Up Data window, click Continue.
10. In the Specify how you want to use this wizard page, select Configure all services
using the wizard. Click Continue.
Note:
Note: You can set up media servers to various configurations. The following steps
provide a general outline of required steps to complete the configuration.
11. In the Set Server Identifies window:
● In the Host Name field, enter a unique name for the server.
● In the ID field, enter as required or accept the default.
● In the CNA field, enter as required or accept the default.
● In the Enterprise LAN field, enter as required or accept the default.
● In the Assign the Processor Ethernet to an Interface area, select one as required.
To Next Page
Loading...
