Migrating from a DEFINITY Server CSI in a CMC with a Linear Flash to an S8400 Media Server that uses a
342 Upgrading, Migrating, and Converting Media Servers and Gateways
5. When the prompt displays with menu options, select Install or Upgrade Software.
Use the arrow keys to navigate and the space bar to select.
When the system finishes, the media server reboots.
6. Open a Web browser.
7. In the Address field, type http://192.11.13.6. Press Enter to access the login Web
page.
8. Log in as craft or dadmin.
Configuring the media server
To configure the media server:
1. Open a Web browser.
2. In the Address field, type http://192.11.13.6. Press Enter to access the login Web
page.
3. Log in as craft or dadmin.
4. Under Maintenance, click Launch Maintenance Web Interface.
5. Under Server, click Server Date/Time.
6. In the Server Date/Time window, verify the data and time are correct. If the date and time
are incorrect::
a. Enter the date
b. Enter the time
c. Select the time zone
d. Click Submit:
7. Under Server Configuration, click Configure Server.
The system starts the Configure Server Wizard.
8. In the Review Notices window, click Continue.
9. In the Back Up Data window, click Continue.
10. In the Specify how you want to use this wizard page, select Configure all servers
using the wizard and click Continue.
Note:
Note: You can set up media servers to various configurations. The following steps
provide a general outline of required steps to complete the configuration.
To Next Page
Loading...
