Converting software duplication link to a DAL1 link on an S8720 Media Server
1224 Upgrading, Migrating, and Converting Media Servers and Gateways
Removing power from the server(s)
To shut down a S8710 or S8720 server pair:
1. At the Web interface main menu for the standby server select Backup Now and backup the
data to flashcard.
2. At the Web interface main menu for the standby server, select Shutdown Server.
The Shutdown This Server page appears.
3. Select Immediate Shutdown and clear the Restart server after shutdown option.
4. Press the Shutdown button and wait until the server has turned off.
5. At the main menu for the active server, select Backup Now and backup the data to
flashcard.
6. Select Shutdown Server with these options:
● Choose the Immediate option
● Select Even If Server is Active
● Do not select Restart server after shutdown.
7. Click the Shutdown button and wait until the server has turned off.
8. When both servers are turned off, remove power from the servers.
To Next Page
Loading...
