Migrating from a DEFINITY Server CSI in a CMC with a Linear Flash to an S8400 Media Server that uses a
338 Upgrading, Migrating, and Converting Media Servers and Gateways
Saving translations
This step is important in case you need to back out of the migration.
To save translations from the CSI:
Note:
Note: Save translations to a flash card.
1. Plug the Linear Flash card in the PCMCIA slot on the TN798B Processor circuit pack.
2. Type save translation and press Enter to save translations to the PCMCIA.
3. The system displays a Command successfully completed message or an error message.
Migration tasks
You can reuse the translations from the current system when you migrate to an S8400 Media
Server.
Note:
Note: You must install the new Communication Manager license file on the media
server before you make the change. The SIPI serial number can be used for
licensing purposes.
Perform these tasks to convert a processor port network to a port network (CMC).
Verifying hardware
Ensure that you have the conversion specific hardware on hand.
Note:
Note: The TN8400AP Media Server circuit pack that contains the IA770 feature
replaces the TN798 or TN2402 Processor circuit pack that does not have that
feature. You must return the current processor circuit pack to Avaya.
To Next Page
Loading...
