Avaya S8100 Series - Migrating translations; Installing the software load; Configuring the media server

Migrating translations
Issue 2.1 June 2006 399
Migrating translations
This section describes how to migrate the translation files from the current system to the S8400
Media Server.
Installing the software load
To install the software load:
1. From the Services laptop, click Start > Run to open the Run window.
2. Type ping -t 192.11.13.6. Press Enter to indicate when the Services port is
responding.
3. Click Start > Run to open the Run window.
4. Type telnet 192.11.13.6. Press Enter to telnet in to the Services port on the front of
the S8400 Media Server.
5. When the prompt displays with menu options, select Install or Upgrade Software.
Use the arrow keys to navigate and the space bar to select.
When the system finishes, the media server reboots.
6. Open a Web browser.
7. In the Address field, type http://192.11.13.6. Press Enter to access the login Web
page.
8. Log in as craft or dadmin.
Configuring the media server
To configure the media server:
1. Open a Web browser.
2. In the Address field, type http://192.11.13.6. Press Enter to access the login Web
page.
3. Log in as craft or dadmin.
4. Under Maintenance, click Launch Maintenance Web Interface.