EasyManua.ls Logo

Avaya S8100 Series - Migration tasks

Avaya S8100 Series
1262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Migration tasks
Issue 2.1 June 2006 873
Migration tasks
Perform these tasks to migrate an S8500 Media Server to an S8710 Media Server.
Premigration administration:
Verifying hardware on page 874
Upgrading G150, G350 or G700 Media Gateways and local survivable processors (if being
used) on page 874
Upgrading firmware on page 875
Upgrading software on the local survivable processors on page 875
On the S8500 Media Server:
Clearing the ARP cache on the laptop computer on page 876
Connecting to the media server on page 877
Starting a SAT session on page 877
Checking for translation corruption on page 877
Saving translations on page 877
Backing up the translation files on page 878
On the active S8710 Media Server:
Turning on both media servers on page 878
Accessing the media server on page 878
Setting up a Telnet session on page 879
Installing Communication Manager on page 880
Accessing the server command line interface with SSH protocol on page 882
Accessing the media server on page 883
Configuring both media servers using AIW on page 883
On the S8710 Media Servers:
Connecting customer LAN cables on page 884
Restoring the translations on page 884
Pretesting the system on page 885
On the S8500 Media Server:
Disconnecting the S8500 Media Server from the customer network on page 886
On the S8710 Media Servers:
Connecting the S8710 Media Servers to the control network on page 886

Table of Contents

Related product manuals