Migrating an Avaya IP600/S8100 to an S8500 Media Server
578 Upgrading, Migrating, and Converting Media Servers and Gateways
Migration paths
DEFINITY IP600/S8100 and their releases that can be migrated to the S8500 Media Server
IP-PNC configuration include:
● DEFINITY Release 9 through Release 10
● MultiVantage Release 11 and Release 1.x
● Communication Manager Release 1.0 through Release 1.3
To migrate, you can use the existing translations. The only supported method to move
translations from legacy systems is to:
1. Freeze the translations.
2. Send the translations to the Avaya Software Technical Support (STS) group.
STS then returns the translation reports and translation files through e-mail to the project
manager before the migration. For the forms and more information, contact the STS scheduling
desk at 720-444-9418.
Prerequisites
You must complete the following tasks before you start the migration.
● Presite checklist on page 579 - Perform these tasks before you go on site.
● For additional information, see Migration paths on page 578. on page 581 - Perform these
tasks before you start the migration from an existing DEFINITY system.
● Presite migration checklist on page 583 - Perform these tasks before you go on site.
● On site migration checklist on page 584 - Perform these tasks on site before you start the
migration.
● Documentation checklist for migrations on page 585 - Have these documents ready to use
while you perform the migration.
To Next Page
Loading...
