Migrating from a DEFINITY Server CSI in a CMC with a Linear Flash to an S8400 Media Server that uses a
344 Upgrading, Migrating, and Converting Media Servers and Gateways
Copying translation files to the media server
To copy translation files to the media server:
1. Plug the PCMCIA flash card with the translations into the Flash Card Reader attached to
the Services laptop.
2. On the desktop, double-click the PC Card Manager icon > Actions > Copy > Card to
File(s).
When the system finishes, the system opens the Copy: Card to File window.
3. Highlight any old job and click Delete to remove them.
4. In the Copy Jobs area, click New.
When the system finishes, system opens the Define Copy Job window.
5. In the Size field, type the flash card size, for example, 128 MByte.
6. Enter a file name to copy the translation file to and click OK.
An example of a file name might be Csixln.
When the system finishes, the system returns to the Copy: Card to File window.
7. Highlight the desired file. Click Copy.
When the system finishes, the file is placed in the C:\Program Files\PCM directory.
Click Cancel to exit.
8. Open a Web browser.
9. Click Launch Maintenance Web Interface.
10. Under Miscellaneous, click Download Files.
11. Select Files to download from the machine I’m using to connect to the server.
12. Click Browse and select the translation file saved on the Services laptop and click
Download. A translation file example might be C:\Program Files\PCM\Csixln.
The file is placed in the /var/home/ftp/pub directory of the S8400 Media Server.
13. Click Start > Run to open the Run window.
14. Type telnet 192.11.13.6. Click OK to telnet in to the Services port on the front of the
TN8400AP Media Server circuit pack.
15. Log in as craft or dadmin.
16. From the /var/home/ftp/pub directory, run a bash program.
17. Type read_csi_file -f filename. Press Enter where filename in this example is
CsiXln.
The system renames the translation files as xln1 and xln2.
To Next Page
Loading...
Need help?
General
