Migrating from an IP600 or S8100 to an S8400 Media Server using ftp
434 Upgrading, Migrating, and Converting Media Servers and Gateways
Assigning IP addresses to the SIPI circuit packs
When you use static IP addressing, you must assign IP addresses to the SIPI circuit packs.
Using static addressing
You can administer static IP addresses for the SIPI circuit packs. You administer the addresses
directly through the Ethernet port connection on the SIPI faceplate (top port). For more
information, see Figure 8: Connecting directly to the SIPI
.
Figure 8: Connecting directly to the SIPI
Note:
Note: Ensure that you have the password before proceeding.
Figure notes:
1. Services laptop
2. PCMCIA Network Interface Card (NIC)
3. NIC adapter cable (if necessary)
4. CAT5 crossover cable to SIPI
cadlipsi KLC 031502
1
2
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K
3
4
To Next Page
Loading...
