Prerequisites
Issue 2.1 June 2006 743
From a magneto optical disk
Use the Magneto Optical to S87x0 Translations (MOST) Tool to transfer translation files from a
magneto optical disk to an Avaya S8700-Series Media Server. Use this tool only when you
migrate call processing translations on a DEFINITY Server R to an Avaya S8700-Series Media
Server.
The MOST tool is not shipped with each system but might be available locally.
The MOST tool that you use with the S8710 or S8720 Media Server consists of:
● An external Magneto Optical drive
● A USB cable
Ordering information
!
CAUTION:
CAUTION: When creating the optical disk that is used to move translations from the source
system to the S8700-Series Media Server, there are specific steps that must be
followed. For more information, see Presite migration checklist
on page 751.
Prerequisites
This section provides those tasks that must be completed prior to starting the migration.
This section covers the following tasks:
● Presite checklist on page 744 - these are tasks that must be performed before going on
site.
● Additional tasks on page 746 - these are tasks that must be performed on site before
starting the migration from an existing DEFINITY system.
● Presite migration checklist on page 751 - these are tasks that must be completed before
going on site.
Comcode Description
700355415 Magneto Optical Server to S8710 Translations (with
USB cable)
To Next Page
Loading...
