Basic Migration Steps
Issue 2.1 June 2006 935
Migrating from an S8700 or S8710 Media Server to an
S8720 Media Server
Use these procedures to migrate an existing S8700 or S8710 Media Server on Avaya
Communication Manager Release 1.x, 2.x, and 3.x to an S8720 Media Server on
Communication Manager Release 3.1. If the media servers are on Communication Manager
1.x, you must upgrade them to Communication Manager 1.3.2 before the migration. This
migration requires a new Communication Manager license file and an Avaya authentication file.
In this migration, you reuse the system and translation files from the S8700 or S8710 Media
Servers.
With this migration you are upgrading to Communication Manager 3.1. You must upgrade local
survivable processors (LSPs), Enterprise Survivable Servers (ESSs), and H.248 media
gateways before the migration.
Basic Migration Steps
Note:
Note: Whenever you connect to a media server, perform Clearing the ARP cache on
the laptop computer on page 949 to avoid temporary internet files that might
cause confusion.
● If being used, upgrade:
- G150 Media Gateways
- G250 Media Gateways
- G350 Media Gateways
- G700 Media Gateways
- LSPs
- ESSs
● If Communication Manager Release 1.2 or 1.3, install the preupgrade update (patch).
● If Communication Manager Release 1.0 or 1.1, upgrade to Communication Manager
Release 1.3.2.
To Next Page
Loading...
Need help?
General
