Migrating from a DEFINITY Server CSI in a CMC with an ATA Flash to an S8400 Media Server
356 Upgrading, Migrating, and Converting Media Servers and Gateways
Migration paths
Avaya supports the following migrations of a DEFINITY Server CSI in a CMC or a G600 Media
Gateway to the S8400 Media Server configuration:
● DEFINITY Release 9 and later
To migrate, you can use the existing translations. The only supported method to move
translations from legacy systems is to:
1. Copy the translations to the compact flash.
2. Plug the Compact Flash card from the PCMCIA/Compact Flash adapter into the Compact
Flash slot on the TN8400AP Media Server circuit pack.
3. Copy the translation files from the compact flash to the S8400 Media Server.
Prerequisites
You must complete the following tasks before you start the migration:
● Presite checklist on page 357 - Perform these tasks before you go on site.
● Additional tasks on page 359 - Perform these tasks before you start the migration from an
existing DEFINITY system.
● Presite migration checklist on page 361 - Perform these tasks before you go on site.
● On site migration checklist on page 361 - Perform these tasks on site before you start the
migration.
● Documentation checklist for migrations on page 363 - Have these documents ready to use
while you perform the migration.
To Next Page
Loading...
