EasyManua.ls Logo

Avaya S8100 Series - Firmware upgrades; Additional documentation

Avaya S8100 Series
1262 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
64 Upgrading, Migrating, and Converting Media Servers and Gateways
Another type of upgrade is firmware on various hardware components. These components
include
Branch media gateways, such as the G150, the G350, and the G700
Media modules on the branch media gateways
Programmable TN circuit packs
Ethernet switches, such as the C-363T or C-364T
This section does not cover an upgrade of a DEFINITY switch to a Linux-based media server.
This process is called a migration. For more information, see Migrations
on page 297.
Firmware upgrades
Several pieces of equipment require periodic firmware upgrades. This equipment includes:
The IP Server Interface (TN2312AP/BP)
Programable circuit packs (TN799DP, TN2302AP, TN2602AP)
Avaya Ethernet switches (C-363T, C-364T), if being used.
!
Important:
Important: The most current version of firmware must be installed on the programmable
circuit packs, particularly the TN2312AP/BP IP Server Interface. You cannot
activate many features of release 3.1 of Avaya Communication Manager unless
these circuit packs are on the most current version.
Firmware for these products are available from the Avaya Support Web site, http://avaya.com/
support.
Additional documentation
Avaya recommends that you also have the documents that are listed in Chapter 1: Introduction
for the upgrade. These documents are included on the documentation CD-ROM:
Documentation for Avaya Communication Manager, Media Gateways and Servers (03-300151).

Table of Contents

Related product manuals