Installing or converting to an S8500 LSP
1174 Upgrading, Migrating, and Converting Media Servers and Gateways
2. Copy the SAMP software update file to the S8500 with the Download Files option from the
Maintenance Web Interface.
3. Telnet to the S8500 and login.
4. Enter sampupdate <filename> to start the update process.
The update process takes approximately 5 minutes.
5. Enter y in response to the question, Commit this software?
Configuring the modem
If the LSP uses a modem for remote access, follow instructions in Installing and Configuring the
Avaya S8500 Media Server, 03-300143, to configure the modem.
Administering the new primary controller
You must administer the new primary controller so that it can identify and communicate with the
S8500 LSP. To do this, complete the following SAT screens (on the primary controller’s SAT):
1. At the SAT command line, type change node-names ip <name>, where <name> is
the name of the LSP.
The Node Names screen appears.
To Next Page
Loading...
