Converting S8300 ICC mode to LSP mode
1158 Upgrading, Migrating, and Converting Media Servers and Gateways
Before going to the site
Perform the tasks in this section before going to the customer site.
Task Steps/Comments
1. Redesign networks.
Assess the impact of the ICC to LSP conversion on all
voice and voice messaging network nodes. Plan for any
necessary changes to network elements.
In particular, collect the primary server configuration
information for the new LSP; that is, host name and IP
address, primary controller IP address(es), DNS/DHCP IP
addresses (if used), UPS IP addresses (if used), static
routes data (if used), time server data, modem return route
data (if supported by Avaya Services).
2. Create/update license
and authentication files
on the RFA web site.
● Go to http://rfa.avaya.com and follow the steps in
Converting between an ICC and LSP (or a similar
region-specific document if the system is outside the
U.S.) to create new license and authentication files
for the LSP.
● If the new primary controller that will support the LSP
is being migrated to Communication Manager 2.1 or
later, you need to create a new license file for the
primary controller.
To Next Page
Loading...
