Avaya S8100 Series - What is covered in the Conversions Section; What is not covered in the Conversions Section

1036 Upgrading, Migrating, and Converting Media Servers and Gateways
What is covered in the Conversions Section
Table 20 summarizes the conversion procedures this section covers.
What is not covered in the Conversions Section
This section does not cover changes from a DEFINITY communications system to an IP-PNC
or a fiber-PNC Linux-based system. For example, changes from a ProLogix, DEFINITY One, or
an IP600 system to an IP-PNC or fiber-PNC Linux-based system are not covered in this section.
These procedures are considered to be migrations and are covered in the Migrations
section. In
some cases, however, you might need to use the procedures from both sections.
Table 20: Possible conversion paths
To
IP-PNC
S8300
mode
S8500/S87xx mode
From
All
IP-PNC
Mixed
Fiber-PNC
and
IP-PNC
ICC LSP LSP
Dup.
cont
rol
Dup.
bearer
DAL1
dup.
Configuration Conversions
S8500 and S87xx
Fiber-PNC
1
1. Fiber-PNC configurations for the S8700-series Media Server include direct connect, CSS, and ATM.
Fiber-PNC configurations for the S8500 Media Server include only direct connect.
✔✔
S8500 and S87xx mixed
fiber and IP-PNC
✔✔
Mode Conversions
S8300 LSP
✔
S8300 ICC
✔
S8500 Main
✔
S87xx simplex control
✔
S87xx simplex bearer
✔
S87xx software
duplication
✔