Migrating an S8500 Media Server to an S8710 Media Server
878 Upgrading, Migrating, and Converting Media Servers and Gateways
Backing up the translation files
To back up the translation files from the Web interface:
1. Connect the cord of the compact flash disk into one of the USB ports on the front of the
media server.
2. Insert a formatted 128-MB compact flash disk into the bottom slot of the drive.
3. On the menu, click Backup/Restore > Backup Now.
4. Select Avaya Call Processing (ACP) Translations and Local PC and select the number
of data sets to retain as the backup method. The LocalPC is the compact flash.
5. Click Start Backup to start the backup process.
6. Click Backup History to view the progress of the backup process.
7. When you finish, disconnect the Services laptop from the media server.
On active S8710 Media Server
Turning on both media servers
To turn on the media servers:
1. Connect the AC power cord to both media servers and to both UPSs.
2. Push the power button on the media server.
3. Place the CD-ROM with Communication Manager in the CD-ROM drive on the media
server.
The CD must be installed and the media server must boot from the CD. After pressing the
power button on the media server, wait 10 seconds and press the eject button on the CD
tray. The tray opens, insert the CD, and close the tray. Allow the media server to finish
booting.
Accessing the media server
To access the media server:
1. Clear the ARP cache from the laptop if necessary. For more information, Clearing the ARP
cache on the laptop computer on page 876 and return here.)
To Next Page
Loading...
