Basic Migration Steps
Issue 2.1 June 2006 937
Prerequisites
You must complete the following tasks before you start the migration.
● Presite checklist on page 937. Perform these tasks before you go on site.
● Additional tasks on page 939. Perform these tasks on site before you start the migration
from an existing DEFINITY system.
● Presite migration checklist on page 940. Perform these tasks before you go on site.
● On site migration checklist on page 941. Perform these are tasks on site before you start
the migration.
● Documentation checklist for migrations on page 941. Have these documents ready to use
while you perform the migration.
Tasks checklists
Presite checklist
Before you go on site, perform the following tasks
:
9
Task Description
Verify that your Services
laptop has the appropriate
hardware.
Correct hardware components include:
● 40 MB available disk space
● direct Ethernet cable
● serial cable and adapter
● RS-232 port connector
● Network interface card (NIC) with a 10/100
BaseT Ethernet interface
● 10/100 BaseT Ethernet, category 5, or better,
crossconnect cable with an RJ45 connector on
each end, MDI to MDI-X
● CD-ROM drive
Verify that your Services
laptop has the appropriate
software.
Correct software components include:
● Windows 2000/XP operating system
● Terminal emulation program: HyperTerminal or
other
● TCP/IP networking software: bundled with
Windows OS
● Web browser: Internet Explorer 5.0 or later
1 of 3
To Next Page
Loading...
