Avaya S8100 Series - Disconnecting the cables

Migrating an S8500 Media Server to an S8710 Media Server
888 Upgrading, Migrating, and Converting Media Servers and Gateways
Disconnecting the cables
To disconnect the cables:
1. Disconnect the laptop from the Services port.
2. Disconnect the power cord from the UPS.
3. Disconnect the power cord from the RSA.
4. Disconnect the modem from the RS-232 port on the SAMP or RSA card.
5. Disconnect the LAN connection (if used) from the Ethernet port on the SAMP or RSA card.
6. Disconnect the cable from the Ethernet port on the dual network interface card (NIC) (if
used).